- DV9730US DRIVERS DOWNLOAD - This helps to protect your computer when you are browsing the web or reading e-mail. The included muvee AutoProducer software lets you burn your home movies on DVD for friends and family to watch. Without a doubt, compatibility is the most important factor in buying a memory upgrade for your laptop or computer.
- Reinstalling drivers.-Installing some older drivers (helped for about a day).-Reinstalling the system.-Restoring the computer to the factory state.-Switching channels on the router.-Changing security settings on the router.-Disabling IPv6. Current situation: It works almost perfectly in the room where the router is and way worse anywhere else.
Just recently, as of Christmas 2007, I have had a new alumninum 24' iMac. Great machine! One annoying problem (really annoying) is under Boot Camp's Vista OS. I have a valid Vista Home Edition installed and operating quite fine.
Here is the issue:
After running in the Vista partition for more than an hour unattended (screensaver is set to blank or any other), the display is all distorted and wavy.
I have seen people mentioning video issues, and I have reinstalled Leopard BootCamp drivers, manually installed drivers as advised by others on this forum, yet nothing works. I keep getting the same ol' problem.
To explain in more detail: The screen is very pixelated and color gradients (i.e. standard Windows Vista wallpaper looks like an ugly histogram graph). When it's usually very smooth gradients of color, it's very sharp and distinct 'smearing' appearance. Text and icons look terrible too!
As any tech support person would say: 'Just reboot!'
Sure, rebooting clears the issue and it looks great again. Just give it an hour or two and the same ugly discoloration is back.
Anyone out there having issues with this in Vista? Of course Apple really promoted their new iMacs to run Windows under bootcamp (but they won't support it). Poor marketing if you asked me (it is their hardware).
Under the Leopard partition, I have not seen any issues with this display resolution. Leads me to believe it is for sure a windows driver issue. I have fiddled with just about all of the ATI Radeon HD drivers but cannot come up with a solution.
Any help, or updates on the drivers that may solve this would be greatly appreciated.
I'll try Apple again. Wish me luck.
Machine Details:
24' iMac (newer Alumninum - December 2007)
2.8 GHz Intel Core 2 Duo
OSX 10.5 Leopard w/ Boot Camp Windows Vista Home Edition (32 bit)
So, after three days with new drivers, I may have found an ATI driver package that might be working.
Here is what I downloaded and installed:
8-3vista32_dd59752.exe
Found here: http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32
I installed the package and by default set the ATI graphics card driver as an 'ATI Mobility Radeon HD 2600 XT' - so far so good!
I will keep you updated if this ends up not working, but so far no smearing screens and gradient issues within Vista (32-bit) Home Edition on my iMac.
Just thought I would share - again, Apple was unable to help. On my own.
Let me know if others have success with this.
SONY PCG 9L1L DRIVER FOR MAC - This jack is not compatible with IdeaPad S or S models. Compaq Presario V Series: Compatible models coming soon. If your looking for the version of this part for 90 watt AC adapters please click here for our PJ This is for the DC Jack only, you will need to reuse your existing harness cable.
Similar Messages
Hello -
My iMac has developed a video display problem. Everything now appears in a strange, cartoonish way. Purples, greens, blues. Can this be fixed, and if so, any idea how much it might cost? Also, could I output to a seperate monitor? I plan to replace the unit , but cannot right now. Thanks!Go to System Preferences > Universal Access > Seeing.
In the Display area, reset it to 'Black on white' by clicking that checkbox.
You can also reset it by pressing Command-Option-Control-8Where can I find updated Boot Camp Video drivers? I want to update my video drivers on my MacBook running Boot Camp w/ Windows XP. Can I download XP video drivers from nVidia and install?
Hi there,
I recently had XP on my Macbook pro (Late 08) and wanted to update the nvidia GPU drivers. So all I had to do was get the 'Correct' ones from the nvidia website and just installed them like normal.
That being said, I ran into some problems with Windows Vista 64. Constant crashing when booting into the desktop due to incompatible graphics drivers. So what I had to do there was enter the device manager and 'Roll back' the graphics driver. THEN restart in safemode and install the updated graphics driver.
Maybe give that a try and see what happens? Hope we could help you...
TonyPavillion dv9730us does not boot, no video display, (tried external monitor while toggling F4, to no avail...)
Tried the troubleshooting proceedure - (hard reset: pulled battery, discharged 'start' button , connected AC power,
no difference. Repeated the hard reset after pulling the memory modules, and re-installed one at a time in every possible combination, with no change.
The laptop attempts to start up, with lights and fan, but only for a few seconds, then shuts off, and repeats this process.
I noticed that the lights stay on if I press 'esc' for some reason, but the fan does not stay turning. Other than this, there is no change, (no screen, no beeps, etc.)
Any insight here would be greatly appreciated!Thank you for your informative response. This confirms what I suspected, and it corroborates what I was told by a friend who had the same model, with a similar dilema. The repair price tag seems feasible enough, given that the machine's features are contemporary enough to make it worthwhile to give it a try. I would be greatful for any details on the specified repair options, and if there are any 'workarounds' to help prevent such a meltdown in the future, assuming such repairs can reasonably be achieved. Thanks again. (Whatever's right ain't wrong!)
Just got this from a google alert.
Anyone knows if paralels is also not comparable with the new imacs?
http://bgr.com/2012/12/19/new-imac-early-adopters-boot-camp-259318/It is because of the 3TB drive. Since BC needs to create a FAT volume for Windows to install to it can't do that on that large a drive, 2TB limit.
There was a post the other day how to get around this and use BC to install Windows. It has to do with Partitioning the drive to a smaller size from a Boot disc/USB thumb.hello friends i am new to this forum.. i brought a new HP TX 2 - 1370 US laptop from amazon site in USA and now using it in INDIA since 10 months ... it came with AMD processor and ATI raedon HD 4200 graphics . it came with 4 GB DDR 2 ram .
it worked fine for 11 months .. i started using the laptop for more time these days around 10 hrs a day or so . yesterday morning when switched on the laptop the screen is blank and only quick launch buttons are blinking and caps lock buton .. i connected the laptop to a working monitor but no response .
i took it to service centre in INDIA and they changed the RAM and exchanged the slots of RAMS but it didnt work ..and they said there is no warrenty for that models in INDIA ..
i finally went to 3rd party repair shop and they said its due to defective video chip .. it needs to be replaced and they are getting many laptops with similar problems like this ...
is there any way to fix that ? wat am i to do so that i dont ge t these type of problems again ?
i am also using cooling fan for laptop an i am working in AC room with room temp set to 25degrees ...
lease can anyone tell me wat to do ?
shall i get it repaired by 3rd party as i cant send it to USA again .. are the video chips in this model really defective ?
thank you all ..........waiting for your responses....Hello!
I just wanted to share my video display problem. Mine is a tx2-1375dx. When is turned ON cold, it shows rubbish, like the sequence shown next. The problem persists using an external video display or projector.
Then, instead, I warm up the back of the display with a hair dryer, not too much, but that feel the heat has transfered inside, the Tx2 runs just fine. I also keep a fan cooling pad underneath instead of having the inner fan run 24x7.
So I guess the video chip has a thermal sensor that is being signaled when the display is warm and then runs fine. This would mean part of the functionality of the video chip may have been compromised by heat on the motherboard.
Too bad a promising machine was so poorly designed inside. It becomes too hot to put on your lap, so is no longer a 'laptop'.
So now, my other thing on my backpack to work is a hair dryer!
Greetings from Central America!Hello
Im running a macbook pro in windows vista 32 bit boot camp mode. Every thing works fine except that the device manager only shows the VGA adapter and not the Nvidia Geforce 8600M GT I have equiped. I cant find any drivers for this card. Is there any way to get Vista to use it properly?
ThanksThis forum is for troubleshooting issues related to the usage of Mac OS X, not Boot Camp or Windows. Post your question in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237Hi there,
I'm facing a very serious issue with MacBook Pro Unibody running MS Vista under Boot Camp: using the Mini DisplayPort to VGA adapter to hook a projector is 95% impossible because the only resolution available is 640x480 or sometimes 800x600. No solution came from the adaptor firmware update, still same behavior: connecting the external projector/monitor toggles 640x480 resolution with no more choices available. Just 5% of attempts on selected projectors gave me access to the complete resolutions list.
This is having a serious impact on my job where I do need both Mac&Windows running natively and with external display capabilities, please I'm looking for some feedback from users facing the same problem or someone who had an official answer on this issue from Apple. Do avoid posting about using modded display drivers please: I know they exist but the adaptor should be working with original ones.
I can understand Apple does not support MS Vista issues but this seems to be a hardware/driver one.
I'd like to point out I'm using a clean Vista installation with Apple drivers (from the Leopard DVD) and I've run Vista (same version, same gfx drivers etc) under Boot Camp on my previous MPB (with integrated DVI output+adapter) on hundreds of different projectors with never a single problem.
Any feedback is really appreciated.
L.I'm having the same problem. When I try to connect to the switch in our conference room (connecting both a flat panel display and/or a projector, both with much higher native resolutions), all I get is 640x480. This is a huge problem to using bootcamp, and I really need to get this to work. I was able to get a higher resolution 1280x800 on a separate, portable display, so I'm wondering if people have the problem with standalone projectors or only with projectors connected to some sort of switch, in my case an Extron MPX423A. I have also tried this in both Windows Vista (32-bit) and Windows 7 RC1 (32-bit), with the bootcamp drivers and the latest NVidia drivers, and the behavior is the same all around.
There seems to be problems with the video drivers and Photoshop CS4. Upon starting it says that Photoshop has encountered a problem with the video drivers and GPU enhancements will be disabled. If I enable it (Open GL drawing) anyway I get a messed up drawing sheet.
Adobe says it is important to update the video drivers to the latest version, but yeah, I can't, being on Boot Camp.
Anyone has had this happen too?
I'm waiting for an update on display drivers for Boot Camp anxiously!Did you uppdate to bootcamp 3.1? To update to 3.1 you need to have installed 3.0 from your Snow Leopard install disc. What version of the display driver are you using.
See this thread that just started too.
http://discussions.apple.com/thread.jspa?threadID=2345677
3.1 solved the 'display stopped responding' for me. Of course that introduced other issues.
Check your driver version and read here for other display issues fun...
http://discussions.apple.com/thread.jspa?threadID=2328909
http://discussions.apple.com/thread.jspa?threadID=2307311
http://discussions.apple.com/thread.jspa?threadID=2315531Was given this iMac G3 with Tiger 10.4.3 installed, have no knowledge of its history, here's the situation:
When it's first powered on (after not being on for awhile), it usually shuts down right away, after maybe a second or two. The 2nd time the power button is pushed, it usually stays on a little longer before shutting down. The 3rd time it may boot up all the way, but about half the time it will shut down before it's fully booted. By the 4th time, it almost always boots up completely, but when left on, it will shut down by itself at some point, between 10-30 minutes later.
Also, the video display has a bunch of horizontal lines running through it all the time, like bad TV reception with a 'rabbit ears' antenna. This condition will get better after the iMac has been on for awhile. Plus the display is somewhat dim, even with the brightness control maxed.
Thinking it might be a power problem, I took it apart and replaced the down converter/power supply with one I had left over from a previous iMac motherboard replacement - didn't change a thing, same symptoms/problems.
SO, is replacing the motherboard the next thing to try, or replacing the video board? Is the video board part of the motherboard? I'm a PC guy that's worked a bit on these old iMacs, so I don't have all the answers.
I have not tried the firmware update, perhaps I should attempt this first, as it appears this iMac is exhibiting some of the symptoms that the firmware upgrades mention. I will probably go ahead with 4.1.9 firmware update and see if that makes a difference.
Any suggestions would be greatly appreciated!
iMac G3 600MHz SE Mac OS X (10.4.3) 384MB RAM, 40G HD
iBook G3 500MHz Mac OS X (10.3.9)
iBook G3 500MHz Mac OS X (10.3.9)Found out it has the latest firmware.
I did a PRAM update and this seems to have helped. Lines are gone from the display, it's brighter and no power offs on boot since the update. Will keep it running and see what happens.I've been doing research and a lot of people seem to have problems with macbook pros mics not working for vista or XP. My current problem is on an Imac running Windows 7 32bit boot camp. The built in mic REFUSES to work be recognized or show any signs of picking up sounds. It won't work in Sound Recorder, Ventrillo or any program. Any help is appreciated if you need any more info let me know. Yes my mac is fully updated with both windows updates and mac updates.
-Nick.
Edit: I'm running an Imac Version 10.6.6 intel core 2 duo, 2.4GHzSame Here... is there any solution? i have 64 bit windows 7 and still the same problem.. external mics don't work either!
Hi Guys,
I just got my father's Macbook Pro he bought last year for christmas, and I was already excited how I could actually have both Mac and Windows on one laptop (as I need Windows for making music in Fl Studio). Now the problem is, that there is no Sound coming out of the MBP when in Windows, and there is the infamous red light coming out of the Headphones Jack. I'll explain everything I did in steps so that you get the idea. So first of all, I started with the Bootcamp Partition and Installation. Since I lost my Mac OS X (or tbh my father lost it ) I was happy to see that I could actually download the 'support software a.k.a. Drivers' directly before the installation. Well, guess what, It didn't work because the 'support software was not available'. Anyways, I proceeded with the Installation as if I had the CD and Drivers ready. Everything went fine, after booting to Windows I installed Bootcamp and the drivers (Since I found someone posting the .Iso file of the contents of the MAC OS X CD I lost, so I downloaded it.), I was excited to see that every button on the keyboard worked and also the trackpad worked almost flawlessly.Now after the Installation, I did some Windows updates, and then I wanted to listen to some Music, and suddenly I realized that my Sound isn't working! And the Jack started to Glow Red.
So I went online, in search of the problem. I found various 'fixes' for the problem, such as installing a Cirrus Driver (well that didn't work, as it said that my windows is in Slovak and that's not a supported language... what the ****?), then I tried to install Realtek Drivers - didn't do anything (although I didn't uninstall the old ones, because I wasn't sure how exactly to do that.)... Well I think it might be helpful if I'll just summarize what 'fixes' I tried:
Update to Boot Camp 3.1 - Didn't work
Update to Service Pack 1 or later. - Updating to Service Pack 1 and then 2 got rid of the red light, when there is no sound output, as soon as I try to play something it's back on, glowing like a Christmas Tree
Try to wiggle a toothpick in the headphone jack - amazing fix, isn't it? Well I actually found out that It worked for some people, and since I'm desperate, I tried it... As expected, it didn't work.
Install Realtek Drivers - as mentioned above, didn't work...
Install Cirrus Drivers - Slovak Language not 'supported'... right.
Update Boot Camp to latest update - Didn't Work...
Install a 32 Bit Version of Windows - I didn't mention this, I had first a 64 bit version of Windows 7 Installed, and the sound didn't work as well. As there was some problem with the Boot Camp installation, I tried to reinstall to 32 Bit, But used Windows Vista instead, because I heard Windows 7 Is 'not yet supported' or something..
Make sure the Speakers are 'preset' as a default device in the Sounds Control Panel - It Already was preset -.-
'Rage Plug' the computer and hope for the best...? Yeah.
Can anyone finally tell me how to fix this, I am desperate, tired, angry and all the other negative emotions you can imagine right no, because I spent hours on this, looking up millions of forums, in which there was no answer for me!!
Please.
Thanks.Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and installHay people, I found a fix for the freezing issues with Vista running in Boot camp with the new, unibody Macbook pros. The driver for the 9600M Gt is no good if you install it from the Apple 2.1 version driver disc (Mac osx disc)for some (most) of us.
I needed to go to Nvidia's site and download the one from DECEMBER 08. If you click the 'download drivers' tab on the site, scroll past the current driver it wants you to look at (go to the near bottom of page), click the archives, and input your OS version. Also input 'Gforce' and 'M' series when needed. It will give you a choice of two drivers. DO NOT CHOOSE THE FEB 09 Driver. Thats the BAD driver for most of us. Choose the DECEMBER 08 driver. Download and enjoy. Be sure to roll back the VGA driver (or the current driver) first before you install this. It should work.
I've been through the ringer with this for weeks now and have even tried to take my MBP back to swap for a new one. Apple wont have any of that so I thought I was SOL. Not quite. This DOES work for me with Vista. It also works for Windows & if you have it handy.
By the way, I am posting this for people who HAVE HAD THE FREEZING problems, not for people who haven't. Apparently there are some out there who are running Vista just fine on their unibody MBS's. Most of us are not.
Cheer's-----Seattle, where the evil empire looms darkThis never worked. I sold that machine and got a new 17' unibody. IT, by the way, works just fine. I KNEW it was that **** 15'. It took 30 more seconds to boot up I found out also.
The iMac will not boot. The Apple displays on the screen, the cursor spins for awhile, and then it loops into a reboot effort.
Last night, I was doing a lot of custom file sharing settings using the include enclosed folders option at the bottom of the Get Info window.
Question 1: Could that file sharing process have messed things up?
In an effort to get things going........ A few weeks back, I used Disk Utility to create a 2nd partition, with the intent of installing Ubuntu Linux there. I never attempted the install, as far as I can remember, while playing with the Ubuntu Live CD. So, I thought I would install 10.5.6 from the CD in the 2nd partition. But I get an error message that says 'The installer could not create the folder '/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.'
Question 2: I also shared that partition, could that have caused the OS install failure?
Question 3: If I understand the book correctly, I can try to install the OS from the CD on the 1st partition, and not lose my data, correct? Unfortunately, I don't have any backup for the data, as I don't own any drives large enough yet to accommodate the data on the drive.
Question 4: Anyone have any other thoughts as to what ent wrong?Hi, Grant.
Sometimes, it just pays to think on a problem. I awoke thinking, if it will boot the OS X install CD, it ought to boot my Ubuntu Live CD. And then, maybe I can change permissions on the first partition. As soon as I thought that, it occurred to me, if the problems are with the permissions, what if I used the OS X disk, and erased (formatted) the Ubuntu partition. That should set all the permissions on that partition back to default. Would OS X install then to the Ubuntu partition?
You better believe it did!! I'm typing this from the Mac after updating my 10.5.6 to 10.5.8 in the 2nd partition, and I'm booting from the 2nd partition.
I then did as you suggested, and from the Mac, I repaired the permissions to the first partition. But, the result was the same, there are a few permissions that do not match, and Disk Utility cannot, does not, or will not correct them.
I'm currently downloading the 10.5.8 combo update .dmg file. My thought is to burn that to a disk, and then install it over the version in partition 1. And trust that the current installation on partition 1 does not have any cross linked files that will destroy some data.
I do have some old ATA IDE drives I can hook externally to the Mac, and copy some of the information I have from the Mac to those drives before doing the 10.5.8 install.
Can you think of a better solution?I installed the technical preview on a 27' late 2013 iMac using the most recent Boot Camp Assistant. While some listed fixes for WiFi adapter worked, I have a second display connected by DVI > Thunderbolt. I have tried disabling fast startup, a confirmed
fix for Thunderbolt input not being detected. I have also tried running AMD support installer for drivers on Windows 8.1 for Boot Camp for my iMac model, and the driver install fails. I realize it's a bit of a niche issue, but if anyone has any ideas I'd love
to hear them.Hi,
According to your description, it seems a Thunderbolt driver issue or a device compatibility issue with Windows 10 Technical Preview, while we have little experience with Thunderbolt Display
So, in order to better help you, I would recommend post this issue in
Apple Support Communities
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support
Maybe you are looking for
Dv9730us Drivers For Mac Drivers
Hi All, I have uploaded a PDF file in KM, i have created KM document iview for that, in portal content when i triying to priview this iview it is getting opened. I have assigned this as link in in ESS but when i am trying to access this link i am get
Hi ... currently we are facing some problems within the processes of L/C's. In general it is working fine but I would like to have a better understanding concerning the following questions. 1. In the background there is the update of the S131 doc. pa
We are trying to create a Settlement Rule for a Production Order for material 900010001 with following details: Cat:MAT Settlement Receiver:900010001 % :100 Settlement Type:FUL System is giving an error msg. no.KD063 'Distribution rule for an Article
Hi, can you give me please the UEFI Bios? S/N: 602-V287-04SB1208179436 Current vbios: docs.google.com/file/d/0BwbrRkLTxStOX0JZekJXYXFrdlk/edit?usp=sharing Thank you
I am using SQL 2000, 2005 and 2008. I have few multi instances SQL servers. I would like to gather following information: Host Name SQL Instance Name SQL Version Server1 Server1 SQL 2000 Server1 Server1ABC SQL 2005 Server1 Server1XYZ SQL 2008 Serve